First, we have my PCs and SDRs, on the shelf at the back. One Dell Optiplex, Micro Form Factor, and two Intel NUCs control my three Perseus. Each have an 8 TB hard drive. The Diamond 30A power supply powers the hard drives and one of the NUCs. My KiwiSDR is powered by a lab-grade 5VDC PSU, which also feeds two Perseus (a NUC powers the last one). A web-based antenna switch is on the right, because I use four antennas but only have three SDRs.
On the table in front are four DX-Engineering preamps for the beverage feedlines coming through the wall. They are fed by a separate, 13.8VDC PSU (under the bed). From each preamp goes a coax to four splitters. The three to the left will be replaced by Mini-Circuits 8-port splitters like the one on the right.
The KiwiSDR is connected to an 80-metre longwire in N-S orientation. The feedline is amplified with a Wellbrook splitter/preamp. The Cloud-IQ on the table is also connected to the longwire. Other SDRs in my shack is the ColibriNANO and the Airspy R2/Spyverter R2.
Moving to the other end of the living room are Ole Forr's and OJ Sagdahl's gear; five Perseus in all, plus preamps and a number of 8 TB hard drives, also two web based antenna switches. The PCs are hidden from view. The Tandberg Huldra 11 receiver now serves as a front end for my DAB+ receiver on the shelf above, partly hidden.
Finally a peak at TJ Bråtveit's setup, Perseus, Winradio G33DDC and Elad FDM-S2, two PCs and 8 TB hard drives, and a web-based antenna switch.
Linear power supplies is a must, and we have four of these 30A beasts, plus a few small ones. The voltage knob is removed for equipment safety reasons.